finished cost
英 [ˈfɪnɪʃt kɒst]
美 [ˈfɪnɪʃt kɔːst]
完工成本
双语例句
- The price of the finished product consists of the cost of your material, making charges and handling charges.
制成品的价格包括原材料成本、加工费及经营费。 - Allocated the balance to Work in Process, Finished Goods, and Cost of Goods Sold on some equitable basis
将余额转入在产品、产成品和产品销售成本账户 - First, the balance may be allocated among the work in process, finished goods, and cost of goods sold accounts.
第一种方法是将余额分配到在产品、产成品和产品销售成本账户。 - The finished product rate will rise while production cost will is reduce.
产品的成本率会上升，而生产成本则会降低。 - Through improving process of grinding balls casting, the overall rate of finished products has been increased and hence the lowering down of operation cost.
改进奥贝球磨铁磨球铸造工艺，提高磨球的综合成品率，降低生产成本。 - Although no one would dispute the importance of these latter items to a finished product, determining and tracing their cost to the units manufactured is troublesome and expensive.
虽然这些材料同样重要，但将其追溯到相应产品上不但麻烦而且成本昂贵。 - The term standard cost usually refers to the cost of a single finished unit of output. In contrast, the term budgeted cost usually refers to a total amount.
标准成本通常指一件完工产品的成本，而预算成本则倾向于表达某种产品的成本总额。 - Some will base the loan on finished value, while others will base the loan on cost to build.
有些人会基地的贷款就完成的价值，而其他基地的贷款成本才能建成。 - Inventory of merchandise, raw materials, products in process of production, semi-finished products, finished products and by-products shall be valued according to the cost price.
商品、原材料、在产品、半成品、产成品和副产品等的盘存，应当按照成本价计算。 - You did your best to buy some space and anyway finished the delivery, then the boss thinks the cost was too high.
你终于搞定了不可能有的舱位准时飞掉了货，但是老板觉得费用太高了。 - We are now ready to trace these costs through Work in Process and Finished Goods to the Cost of Goods Sold account.
现在就可以跟踪这些成本，通过在制品和制成品账户转至销货成本账户。 - In this case, product costs are debited to a single work in process account. The unit cost of the finished product is determined by dividing the total product cost by the number of units 'product.
制造成本只需记入一在产品账户，总的制造成本除以产品数量便是产成品的单位成本。 - Then utilizes the code of numerical control of Pro/ E to turn into the function, probes the round involute thread processing method of scroll profile, In order to reduce the finished cost and raise the machining accuracy to find the new method.
利用Pro／E的数控代码生成功能，探索圆的渐开线涡旋型线的加工方法，为降低加工成本、提高加工精度找到新的方法。 - Some manipulation experiments that can't be done practically can be finished through simulation calculation, and it has practical significance for reducing the cost of model experiments and studying the underwater vehicle's manipulation, especially for manipulation design in the scheme design phase.
该方法可以对某些现实中难以进行的操纵性试验进行仿真计算，对于研究水下机器人的操纵性尤其是在方案设计阶段的操纵性设计和降低试验成本有一定的现实意义。 - This dissertation is finished in modern cost management mode-Activity-Based Cost; Activity-based cost accounting system is regarded as the optimized and most promising method to confirm and control logistics cost.
本文采用现代成本管理模式&作业成本法，以作业为基础的成本核算体系被认为是确定和控制物流成本费用最优化、最有前途的方法。 - By practice this advanced drilling technology, work of drilling was finished well at very low cost, high accuracy in very short time.
实践表明：利用先进的钻进技术是能够达到很好钻探效果，可在短时间内，高精度、低成本完成打井施工任务。 - A few things on the visualized modeling are finished. A visual port equipment computer assistant decision support system based on life cycle cost theory is developed for the first time in our country.
论文在决策支持系统实现建模可视化方面作了一定的工作，首次在国内研制了一个基于寿命周期费用理论的可视化的港口设备计算机辅助决策支持系统软件。 - According to impurity inspection, spinning mill could accurately compute the amount of cotton required and through adopting the correct technologic methods, finished yarn could decrease the defects, reduce the cost, improve the quality and uniform the strips.
棉纺厂可以据此正确计算用棉量，采用相应工艺措施，使成纱疵点减少，条干均匀，提高成品质量，降低成本，所以杂质检验具有重要意义。 - The characteristics, the product efficiency, the finished product rate and the cost of PDP are all strongly depended on the film materials and quality, and also on the preparation methods.
PDP的性能、质量、生产效率、成品率、器件成本直接取决于所用膜材料和成膜质量及成膜技术水平。 - In unstructured P2P and relaxed structured P2P, nodes connect each other at random, which leads to data query to be finished depending on flooding, results in high cost in the network and low scalability.
由于非结构化P2P网络和松散化P2P网络中节点自由连接的随意性，使得数据查询必须依靠洪泛来完成，网络开销大，可扩展性差。 - The finished product ratio influences the cost directly.
成材率的高低直接影响着企业的生产成本。 - The results showed that the abrasion resistance of vulcanizate and the performance of finished tire improved and the compound cost reduced without any adverse effect on the physical properties of vulcanizate by using 3 phr active zinc oxide instead of 4 phr indirect method zinc oxide in tread compound.
结果表明，以3份活性氧化锌替代4份间接法氧化锌用于胎面胶中，对硫化胶的物理性能无不良影响，可提高硫化胶的耐磨性和成品性能，降低胶料成本。 - For many blade machining process plans, if the clean-up machining can be completed on the 4& axis NC machine, the production efficiency can be increased and the finished cost can be reduced effectively.
对于许多叶片加工工艺方案而言，若能在四坐标数控机床上完成清根加工，可以起到提高生成效率、降低加工成本等积极作用。 - In the process of Kitasamycin Tartrate, the finished product can be produced by freeze-drying. Compared with spray-dry, finished product by freeze-drying have many merits, such as high yield, low cost, good fluidity, fast dissolved speed, and little remnant resolvent.
应用冻干法制备酒石酸吉他霉素，比用喷干法制备的成品收率高，成本低，流动性好，溶解速度快，残留溶媒低，其理化指标符合标准规定。 - The Construction industry management characteristic is: Constructs itself because has the influence to the natural environment and the social environment, thus must withstand which the certain environment cost, the construction process environmental pollution cost, and the construction finished environment reorganization cost and so on.
建筑业的经营特点是：建设本身由于对自然环境和社会环境造成影响，因而要承受一定的环境成本。例如施工过程的环境污染成本、施工结束的环境整理成本等等。 - As the first step of ceramics machining process, the finished surface quality of slot grinding makes great effect to the machining efficiency and cost of the follow-up process.
而切割加工作为先进陶瓷制品加工流程中的第一道工序，其加工质量对后面的磨削、研磨及抛光的效率和成本有着很大的影响。 - Reasonable oil depot layout of finished oil is of great value for improving efficiency and decreasing cost of finished oil logistics distribution.
科学合理的油库布局对于提高成品油物流配送运行效率，降低物流配送成本具有重要的价值。 - So far, the optical polishing finished in high-precision instrument, which will make a substantial increase in processing cost, and restrict the widespread use of aspheric parts.
现有的光学抛光加工是依赖于高精密器械，采用柔顺研抛的控制方式完成的。但高精密设备的价格昂贵，限制了非球面光学零件的广泛应用。